1996-2001 of release
Repair and car operation
+ 1. Maintenance instruction
+ 1.2. Information before car driving
- 1.3. Independent maintenance
188.8.131.52. Choice of engine oil
184.108.40.206. Check of level of cooling liquid of the engine
220.127.116.11. A choice such as a coolant
18.104.22.168. Check and replacement of the filter of the air conditioner
+ 1.3.2. Wheels and tires
+ 1.3.3. Electric components
1.3.4. A water additive in a washer tank
+ 1.3.5. Replacement of lighting lamps
+ 1.4. Technical characteristics
+ 1.5. Some councils upon car purchase
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment
Look at a transparent tank for cooling liquid when the engine will be cold. Level of cooling liquid satisfactory if it is between the FULL and LOW lines on a tank. If level is lower, add cooling liquid type ethylene-glikolevogo for appropriate protection of aluminum components against corrosion.
Level of cooling liquid in a tank will change depending on engine temperature. But, if level is below the LOW line, add cooling liquid. Raise level to the FULL line.
If level of cooling liquid falls for a short time after replenishment, probably, there is a leak in system. Visually check a radiator, hoses, a cover of a bulk mouth of cooling liquid of the engine, a cover of a radiator and a drain stopper, the water pump.
If will not find any leak, it is necessary to check pressure of a cover at the dealer and to find out, whether there is no leak in cooling system.