Toyota Camry

1996-2001 of release

Repair and car operation

Kamri's Toyota
+ 1. Maintenance instruction
+ 1.2. Information before car driving
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Some councils upon car purchase
- 2. Maintenance
   2.2. Schedule of servicing of Toyota Camry/Avalon
   2.3. Primary and secondary checks
   2.4. Check of level of oil and liquids
   2.5. Check of a condition of tires and pressure in tires
   2.6. Check of level of liquid of system of hydrostrengthening of a steering
   2.7. Check of level of AKPP liquid
   2.8. Replacement of engine oil and oil filter
   2.9. Survey and replacement of brushes of screen wipers
   2.10. Check, servicing and battery charging
   2.11. Check, adjustment of a tension and replacement of a driving belt
   2.12. Check and replacement of hoses in an impellent compartment
   2.13. Check of system of cooling
   + 2.14. Shift of wheels
   2.15. Check of brake system
   2.16. Replacement of the air filter
   2.17. Power supply system check
   2.18. Check of level of liquid of differential (AKPP)
   2.19. Check of level of MKPP oil
   2.20. Steering and suspension bracket check
   2.21. Check of covers of semi-axes
   2.22. Check of final system
   2.23. Height and free wheeling of pedals of coupling and brake
   2.24. Replacement of the fuel filter
   2.25. Replacement of cooling liquid and washing of system of cooling
   2.26. Check of the system, supervising allocation паров fuels
   2.27. AKPP liquid replacement
   2.28. MKPP oil replacement
   2.29. Check of fastenings of a body
   2.30. Check and replacement of spark plugs
   2.31. Check and replacement of wires of spark plugs
   2.32. Check and adjustment of gaps of valves
   2.33. Replacement of laying of a cover of a jellied mouth of a fuel tank
   2.34. Check and replacement of the valve of ventilation of a case
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment

2.8. Replacement of engine oil and oil filter

GENERAL INFORMATION

Before the beginning of work prepare necessary tools and materials.

Tools necessary for replacement of the oil filter

1. Pallet

2. Rubber gloves

3. Wrench handle

4. Nozzle

5. A special key for untwisting of the oil filter

6. A nozzle for untwisting of the oil filter

PERFORMANCE ORDER

1. Warm up the engine. Remove a cap of a jellied mouth of oil.

2. Lift the car and establish it on support.

3. Establish the pallet under a drain opening of the oil pallet and turn off a cap by means of a cap wrench. Wait, while oil will flow down. Wipe a cap and establish it into place.

4. Establish the pallet under the oil filter and unscrew the filter, rotating it counter-clockwise a special key.

5. Wipe the block of cylinders and an opening for filter installation.

6. Grease rubber laying of the new filter by engine oil and twirl the filter into place. Twist the filter a hand while laying of the filter will not concern the block of cylinders. Then turn the filter in addition on 3/4 turns.

7. Fill in new engine oil through a jellied mouth. Wait, while oil will flow down in the pallet. Start the engine and check, whether there is no leak. Check oil level. If necessary add oil.