1996-2001 of release
Repair and car operation
+ 1. Maintenance instruction
+ 1.2. Information before car driving
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Some councils upon car purchase
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
- 9. Running gear
+ 9.1.2. Technical characteristics
+ 9.2. Steering
+ 9.3. Semi-axes
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment
Knots of a forward suspension bracket and steering
Knots of a back suspension bracket
Forward suspension bracket of type MacPherson. The top part of a rack fastens to a body through special cups ("caps"). The lower part of a rack fastens to the top part of a rotary fist. The fist fastens to the spherical support mounted on the lever of a suspension bracket.
The back suspension bracket is also equipped with racks. The top part of a rack fastens to a body through caps. The lower part of a rack fastens to an arm of a back axis. The suspension bracket arm sharnirno is connected to pair of levers on each party and with a longitudinal bar.
The steering reechny, consists of a gear lath and sector. The steering mechanism is mounted behind the power unit. The effort to a rotary fist is transferred through the steering drafts connected to the steering mechanism.
At repair of a suspension bracket it is necessary to moisten previously all fastenings subject to influence of dirt and water, getting liquid. Heating application at an otvorachivaniye of carving connections extremely is not recommended for pozharobezopasnost reasons.
Bolts and nuts which turned away with considerable efforts, replace.