Toyota Camry

1996-2001 of release

Repair and car operation

Kamri's Toyota
+ 1. Maintenance instruction
+ 1.2. Information before car driving
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Some councils upon car purchase
+ 2. Maintenance
+ 3. Engines
- 4. Cooling system
   4.2. Technical characteristics
   4.3. Thermostat
   4.4. Cooling fans
   4.5. Radiator and broad tank
   4.6. Water pump
   4.7. The sensor of temperature of cooling liquid
   4.8. Electric chain of the motor of the delivery fan
   4.9. Electric motor of the delivery fan
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment
прадо 150 тойота

4.7. The sensor of temperature of cooling liquid


1. If the sensor of temperature of cooling liquid does not work, check its safety lock.
2. If the indicator of the sensor shows that the engine hot when you only got the cold engine, disconnect a wire from the sensor (it is specified by an arrow). If indications of the indicator decrease, replace the sensor. If indications remain former, means, indicator conducting is punched, or the indicator is faulty. In drawing at the left – the 4-cylinder engine, on the right – 6-cylinder.
3. If the indicator does not show anything after the engine got warm and safety locks of the indicator are whole, muffle the engine, disconnect a wire from the sensor and by means of a crossing point connect a wire to engine grounding. Without getting the engine, for an instant, include ignition. If the indicator shows that the engine is warmed up, replace the sensor.


1. Merge cooling liquid.
2. Disconnect a wire from the sensor.
3. Unscrew the faulty sensor and twist the new. Connect a wire and check operation of the sensor.