Toyota Camry

1996-2001 of release

Repair and car operation

Kamri's Toyota
+ 1. Maintenance instruction
+ 1.2. Information before car driving
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Some councils upon car purchase
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
- 8. Transmission
   - 8.1.2. Care of MKPP
      8.1.3. Ropes of the lever of gear shifting
      8.1.4. Block of the lever of gear shifting
      8.1.5. Switch of lamps of lamps of a backing
      8.1.6. Removal and MKPP installation
   + 8.2. Automatic transmission
   + 8.3. Coupling
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment

8.1.5. Switch of lamps of lamps of a backing

Check and replacement
1. Transfer the ignition key to the situation ON and include a reverse gear. Lamps of a backing should light up.
2. If lamps do not light up, check the ignition switch, safety locks, lamps of lamps and conducting.
3. If lamps are not switched off even then when the reverse gear is switched off, check conducting.
4. If the lamp only on the one hand burns, check a lamp of a lamp and conducting.
5. To check as the switch functions, disconnect a wire from the switch, unscrew the switch and connect an ohmmeter to switch contacts. The chain of the switch should be closed, when the piston of the switch is pressed and the chain should be opened, when the piston is in a free condition.
6. If necessary replace the switch.