Toyota Camry

1996-2001 of release

Repair and car operation



Kamri's Toyota
+ 1. Maintenance instruction
+ 1.2. Information before car driving
- 1.3. Independent maintenance
   1.3.1.2. Choice of engine oil
   1.3.1.3. Check of level of cooling liquid of the engine
   1.3.1.4. A choice such as a coolant
   1.3.1.5. Check and replacement of the filter of the air conditioner
   + 1.3.2. Wheels and tires
   - 1.3.3. Electric components
      1.3.3.1.2. Check of appearance of the storage battery
      1.3.3.1.3. Check of liquid of the storage battery
      1.3.3.1.4. Additional charge of the storage battery
      1.3.3.2. Fuses
   1.3.4. A water additive in a washer tank
   + 1.3.5. Replacement of lighting lamps
+ 1.4. Technical characteristics
+ 1.5. Some councils upon car purchase
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


1.3.3.2. Fuses

GENERAL INFORMATION

Arrangement of fuses (on some models)




If headlights or other electric components do not work, check fuses. If any of them fused, they should be replaced.

Switch off the switch of ignition and idle components. Take the suspicious fuse directly on itself and check it.

Define, what fuse creates a problem. On a cover of the block of fuses the name of a chain of each fuse is shown.

Fuses of type A can be taken out by means of a stripper.

If are not sure, whether fused the fuse, try to replace the suspicious fuse with what, you know, is serviceable.

If the fuse fused, establish new in a clip.

Establish the fuse only with the nominal rate of empire loading specified on a cover of the block of fuses.

If there is no spare fuse, in an emergency situation it is possible to pull out the MIRROR-HEATER, DOME or A/C fuse which is insignificant for normal driving, and to use it if it has the same nominal rate of empire loading.

At impossibility to use the fuse with the same empire loading use what has lower value but as it is possible closer to nominal. If empire loading is lower, than specified, the fuse can fuse again, but it does not indicate any problem. Surely try to get the correct fuse as soon as possible and return replacing it back to an initial clip.

If the new safety lock fuses at once, it means problem existence in electric system. Address to experts as soon as possible.


Prevention

Never use the fuse with higher nominal rate of empire loading or any other subject instead of the fuse. It can cause serious damage and lead to a fire.