Toyota Camry

1996-2001 of release

Repair and car operation



Kamri's Toyota
+ 1. Maintenance instruction
+ 1.2. Information before car driving
- 1.3. Independent maintenance
   1.3.1.2. Choice of engine oil
   1.3.1.3. Check of level of cooling liquid of the engine
   1.3.1.4. A choice such as a coolant
   1.3.1.5. Check and replacement of the filter of the air conditioner
   - 1.3.2. Wheels and tires
      1.3.2.2. Check and replacement of tires
      1.3.2.3. Shift of tires
      1.3.2.4. Installation of tires for movement on snow and antisliding chains
      1.3.2.5. Replacement of wheels
   + 1.3.3. Electric components
   1.3.4. A water additive in a washer tank
   + 1.3.5. Replacement of lighting lamps
+ 1.4. Technical characteristics
+ 1.5. Some councils upon car purchase
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


1.3.2.4. Installation of tires for movement on snow and antisliding chains

GENERAL INFORMATION

When to use tires for movement on snow and an antisliding chain

Tires for movement on snow should be established on all wheels. Installation of tires for movement on snow only on forward wheels can lead to an excessive difference in ability on coupling of tires with road a covering between lobbies and back wheels that will lead to driving loss.

The removed wheels store in a cool dry place.

Note the direction of rotation and surely at repeated installation establish them in the same direction of rotation.

Installation of tires for movement on snow

Tires for movement on snow should be established on all wheels. Installation of tires for movement on snow only on forward wheels can lead to an excessive difference in ability on coupling of tires with road a covering between lobbies and back wheels that will lead to driving loss.

The removed wheels store in a cool dry place.

Note the direction of rotation and surely at repeated installation establish them in the same direction of rotation.

Choice of chains of antisliding


Use chains of antisliding of the correct size. For tires 205 i 65R15 use the following types of chains of antisliding:

And
Diameter of a lateral chain
4 mm
In
Diameter of a cross-section chain
5 mm

Installation of chains

Establish chains on forward wheels and tighten them as the touch is possible. Do not use an antisliding chain on back wheels. To Perezatyanita of a chain, having passed 0,5–1,0 km.

At installation of chains on tires attentively follow instructions of the manufacturer of chains.

If covers of wheels are used, they will be scratched by chains therefore uncover before installation of chains.