Toyota Camry

1996-2001 of release

Repair and car operation



Kamri's Toyota
+ 1. Maintenance instruction
+ 1.2. Information before car driving
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Some councils upon car purchase
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
- 9. Running gear
   + 9.1.2. Technical characteristics
   - 9.2. Steering
      9.2.2. Steering wheel
      9.2.3. Tips of steering drafts
      9.2.4. Covers of the steering mechanism
      9.2.5. Steering mechanism
      9.2.6. Pump of the hydraulic booster
      9.2.7. Air removal from a power steering contour
   + 9.3. Semi-axes
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment
,



9.2.6. Pump of the hydraulic booster

GENERAL INFORMATION

The power steering pump (for cars with the 4-cylinder engine)

1. Right protective panel of a forward wing
2. Union bolt
3. Pressure head tube
4. Belt
5. Laying
6. Vacuum hose
7. Lopastna pump of the hydraulic booster
8. Hose of return of liquid

The power steering pump (for cars with the 6-cylinder engine)

1. Right protective panel of a forward wing
2. Union bolt
3. Laying
4. Pressure head tube
5. Belt
6. Lopastna pump of the hydraulic booster
7. Hose of return of liquid

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Remove liquid from a tank of the hydraulic booster, having sucked away a pear or a syringe.
3. Lift a forward part of the car and remove the right forward wheel.
4. Remove the protective panel of a forward wing.
5. Weaken a collar and disconnect a hose from the pump of the hydraulic booster.
6. Unscrew a bolt of the union and disconnect from the hydraulic booster a tube, copper an union sealant after dismantling of this connection are subject to replacement.
7. Release a bolt of an axis of turn of the pump and a bolt of a natyazhitel of a belt, remove a drive belt.
8. Remove an axial bolt and a bolt of a natyazhitel of a belt. Remove the pump.

Installation

PERFORMANCE ORDER
1. Installation is carried out upside-down. Adjust a belt tension.
2. Fill a tank with liquid and remove air.