Toyota Camry

1996-2001 of release

Repair and car operation



Kamri's Toyota
+ 1. Maintenance instruction
+ 1.2. Information before car driving
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Some councils upon car purchase
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
- 9. Running gear
   + 9.1.2. Technical characteristics
   - 9.2. Steering
      9.2.2. Steering wheel
      9.2.3. Tips of steering drafts
      9.2.4. Covers of the steering mechanism
      9.2.5. Steering mechanism
      9.2.6. Pump of the hydraulic booster
      9.2.7. Air removal from a power steering contour
   + 9.3. Semi-axes
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment
sferateplic



9.2.7. Air removal from a power steering contour

GENERAL INFORMATION

To remove air from a hydraulic actuator of a wheel it is necessary at any dismantling of the highway, irrespective of those measures against hit of air which were accepted.

PERFORMANCE ORDER
1. Establish wheels in the provision of driving on a straight line and check liquid level, if necessary restore, having added to Cold label on щупе a tank.
2. Start the engine and after work on fast single to an engine course again check liquid level, if necessary restore, having added to Cold label on щупе a tank.
3. Turn a wheel here and there against the stop, thus do not allow strong impact with limiters, hold a wheel at the end of each course. Air thus is removed from a contour of the hydraulic booster. At performance of this procedure watch liquid level.
4. Establish wheels in the provision of driving on a straight line and some minutes later stop the engine.
5. Again check level of liquid which should be on the heated-up engine about Hot mark on щупе a tank. If necessary add.