Toyota Camry

1996-2001 of release

Repair and car operation


Kamri's Toyota
+ 1. Maintenance instruction
+ 1.2. Information before car driving
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Some councils upon car purchase
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
- 8. Transmission
   + 8.1.2. Care of MKPP
   - 8.2. Automatic transmission
      8.2.2. Technical characteristics
      8.2.3. Care of AKPP
      8.2.4. General diagnostics
      8.2.5. Rope of the lever of gear shifting
      8.2.6. Butterfly valve rope
      8.2.7. Switch of blocking of ignition
      8.2.8. System of blocking of the lever of gear shifting
      8.2.9. Replacement of epiploons
      8.2.10. Removal and AKPP installation
      8.2.11. Electronic control system
      8.2.12. "Machine gun"
   + 8.3. Coupling
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


Ступени из мрамора для лестниц еще на сайте.

8.2.9. Replacement of epiploons

LEADING SEMI-AXES
PERFORMANCE ORDER
1. Remove semi-axes.
2. Take old epiploons by means of mount or the special tool.
3. Establish new epiploons.

CONDENSING RING OF THE CONDUCTED MECHANISM OF THE SPEEDOMETER

The sensor of speed of the car and casing of the conducted mechanism of a speedometer are located in a back part of a transmission.

PERFORMANCE ORDER
1. Disconnect a wire from the sensor of speed, unscrew fixing bolts (are specified by shooters), remove the sensor and the conducted mechanism.
2. Remove condensing ring.
3. Establish a new ring and establish the mechanism and the sensor on the places.

CONDENSING RING OF THE SENSOR OF SPEED OF STSEPLNY (6-CYLINDER ENGINES)

The sensor of speed of coupling is located on a transmission casing.

PERFORMANCE ORDER
1. Disconnect a wire from the sensor and remove the sensor.
2. Remove an old condensing ring, establish a new ring and establish the sensor into place.