Toyota Camry

1996-2001 of release

Repair and car operation

Kamri's Toyota
+ 1. Maintenance instruction
+ 1.2. Information before car driving
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Some councils upon car purchase
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
- 6. Fuel system
   6.2. Technical characteristics
   6.3. Pressure dumping in fuel system
   6.4. Fuel pump and pressure of fuel
   6.5. Fuel tubes and connections of tubes
   6.6. Removal and installation of the fuel pump
   6.7. Regulator of pressure of fuel
   6.8. Sensor of the index of level of fuel
   6.9. Fuel tank
   6.10. Cleaning and repair of a fuel tank
   6.11. Casing of the air filter
   6.12. Accelerator rope
   6.13. Electronic system of injection of fuel
   6.14. Throttle
   6.15. Fuel highway and injectors
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment

6.13. Electronic system of injection of fuel


The pulse multipoint system of injection of fuel includes three subsystems: system of a fence of air (air filter, airintaking branch pipes, sensor of a stream of air, throttle, monitoring system of idling and inlet collector), system of electronic control and system of supply of fuel (fuel pump, regulator of pressure of fuel, fuel injectors and fuel highway, relay of fuel system).

Check of system of electronic injection of fuel includes check of functioning of all its subsystems and elements of subsystems.


1. To check injectors, get the engine and put to each of them a special stethoscope. If you hear clicks, means, the injector functions normally.
2. If the injector does not click, connect to contacts of a wire of each injector a special lamp. If the lamp blinks, means, on contacts of an injector the correct tension moves.
3. Muffle the engine, disconnect wires from injectors and measure resistance of each injector by means of an ohmmeter. Compare the received results to technical requirements.