п»ї Repair and Toyota Camry car operation - 6.8. Sensor of the index of level of fuel//Kamri's Toyota of 1996-2001 / bars-karate.ru

Toyota Camry

1996-2001 of release

Repair and car operation

Kamri's Toyota
+ 1. Maintenance instruction
+ 1.2. Information before car driving
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Some councils upon car purchase
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
- 6. Fuel system
   6.2. Technical characteristics
   6.3. Pressure dumping in fuel system
   6.4. Fuel pump and pressure of fuel
   6.5. Fuel tubes and connections of tubes
   6.6. Removal and installation of the fuel pump
   6.7. Regulator of pressure of fuel
   6.8. Sensor of the index of level of fuel
   6.9. Fuel tank
   6.10. Cleaning and repair of a fuel tank
   6.11. Casing of the air filter
   6.12. Accelerator rope
   6.13. Electronic system of injection of fuel
   6.14. Throttle
   6.15. Fuel highway and injectors
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment
Самая свежая информация урна металлическая у нас. http://voltstab.ru/8_10kvt.html купить однофазные стабилизаторы напряжения для дома 220.

6.8. Sensor of the index of level of fuel


1. Lower pressure in system. Disconnect a wire of the minus plug of the accumulator.
2. Remove the block of the fuel pump.
3. Disconnect a wire of the sensor and connect an ohmmeter to contacts 2 and 3. Measure resistance of the sensor when the lever of a measuring instrument is lowered completely down (a tank it is empty) about 110-115 Ohm and when the lever is completely lifted (a tank is full) about 2-3 Ohm. When moving lever resistance should change evenly.
4. If necessary replace the sensor.


1. Unscrew screws (are specified by shooters) and press an ear And and pull the sensor up to remove it.
2. Establish the new sensor.