Toyota Camry

1996-2001 of release

Repair and car operation


Kamri's Toyota
+ 1. Maintenance instruction
+ 1.2. Information before car driving
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Some councils upon car purchase
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
- 6. Fuel system
   6.2. Technical characteristics
   6.3. Pressure dumping in fuel system
   6.4. Fuel pump and pressure of fuel
   6.5. Fuel tubes and connections of tubes
   6.6. Removal and installation of the fuel pump
   6.7. Regulator of pressure of fuel
   6.8. Sensor of the index of level of fuel
   6.9. Fuel tank
   6.10. Cleaning and repair of a fuel tank
   6.11. Casing of the air filter
   6.12. Accelerator rope
   6.13. Electronic system of injection of fuel
   6.14. Throttle
   6.15. Fuel highway and injectors
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


6.6. Removal and installation of the fuel pump
GENERAL INFORMATION

The fuel pump – type A
1. Cover
2. Wire of the fuel pump and sensor
3. Protective casing
4. Plate
5. Fuel hose
6. Socket
 7. Fuel pump
8. Filter of the fuel pump
9. Clip
10. Rubber laying
11. Laying
12. The fuel pump in assembly

The fuel pump – type B
1. Fuel level sensor
2. Flange of the fuel pump
3. Sealing ring
4. Fuel filter
5. Fuel pump
6. Pump casing
7. Filter of the fuel pump
8. Clip
 9. Rubber laying
10. Arm
12. Laying
13. Fuel pump assembled
14. Plate
15. Protective casing
16. Wire of the fuel pump and sensor
17. Cover

Removal

PERFORMANCE ORDER
1. Lower pressure in fuel system, and uncover a jellied mouth of a fuel tank.
2. Disconnect a wire of the minus plug of the accumulator.
3. Remove back sitting.
4. Uncover in a floor.
5. Disconnect a wire and a fuel tube. If connection with a razvaltsovka is used, disconnect a fuel tube by means of wrenches. If quick disconnect connection is used, unscrew screws (are specified by shooters in drawing on the right) and remove a protective casing of connection.
6. Unscrew bolts of the block of the fuel pump and the fuel level sensor.
7. Get the block from a fuel tank.
8. Disconnect a wire from the pump.
9. Compress a clamp of a hose of the pump and remove a clamp.
10. Release the lower part of the pump and disconnect the pump from a hose.
11. To remove the type B pump, unscrew the screw (it is specified by an arrow) the fuel filter and remove the filter.
12. In turn hook latches on a pump flange.
13. To Poddenta latches also remove the bottom arm of the pump.
14. Remove a clamp and disconnect the filter from the pump. If necessary replace the filter.

Installation

Installation is carried out upside-down removals.