Toyota Camry

1996-2001 of release

Repair and car operation

Kamri's Toyota
+ 1. Maintenance instruction
+ 1.2. Information before car driving
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Some councils upon car purchase
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
- 8. Transmission
   + 8.1.2. Care of MKPP
   + 8.2. Automatic transmission
   - 8.3. Coupling
      8.3.2. Coupling – the description and check
      8.3.3. Coupling details
      8.3.4. Vyzhimna bearing and fork
      8.3.5. Main cylinder of coupling
      8.3.6. Working cylinder of coupling and accumulator
      8.3.7. Coupling hydraulic actuator
      8.3.8. The blocking switch of coupling
      8.3.9. Probuksovochka
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment

8.3.4. Vyzhimna bearing and fork

1. Disconnect the battery from weight.
2. Remove transmission.
3. Remove a spring, get a fork of switching off of coupling, get from a fork vyzhimny the bearing.


Holding an external holder check freedom of rotation of the bearing. The bearing should rotate freely in a holder. Otherwise the bearing replace. To wash out the bearing in solvent it is forbidden.


1. Grease an internal flute of the bearing, a shlitsa of primary shaft and the holder of the forward bearing of primary shaft of a check point with refractory greasing.
2. Grease with refractory greasing dredging under a spherical support.
3. Grease with refractory greasing of a place of fastening of the bearing and dredging under a pusher of the working cylinder. Establish a spring bracket.
4. Establish on a fork the bearing.
5. Dress the bearing on primary shaft of a check point. Pass a fork through a cover and dress a fork on a support, having pressed on it before click.
6. Slightly grease with refractory greasing a surface of the bearing adjoining to a diafragmenny spring.
7. Further assembly is carried out upside-down.