Toyota Camry

1996-2001 of release

Repair and car operation


Kamri's Toyota
+ 1. Maintenance instruction
+ 1.2. Information before car driving
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Some councils upon car purchase
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
- 8. Transmission
   + 8.1.2. Care of MKPP
   + 8.2. Automatic transmission
   - 8.3. Coupling
      8.3.2. Coupling – the description and check
      8.3.3. Coupling details
      8.3.4. Vyzhimna bearing and fork
      8.3.5. Main cylinder of coupling
      8.3.6. Working cylinder of coupling and accumulator
      8.3.7. Coupling hydraulic actuator
      8.3.8. The blocking switch of coupling
      8.3.9. Probuksovochka
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


8.3.6. Working cylinder of coupling and accumulator

WORKING CYLINDER

Removal
PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Lift a car front.
3. Disconnect from the cylinder a hydraulic actuator tube, unscrew two bolts (are specified by shooters) and remove the cylinder.

Installation

PERFORMANCE ORDER
Attach a tube of a hydraulic actuator and establish the cylinder. Enter a pusher into dredging on a coupling fork. Fix the cylinder and remove air from a hydraulic actuator.

ACCUMULATOR

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Lift a car front.
3. Unscrew aktyuator bolts cruise control, remove an aktyuator and take aside.
4. Remove the battery and a battery tray.
5. Remove a starter.
6. Disconnect from the tube accumulator, unscrew bolts (are specified by shooters) and remove the accumulator.

Installation

PERFORMANCE ORDER
Establish the accumulator, tighten bolts by hand, attach a tube and finally tighten all connections.