Toyota Camry

1996-2001 of release

Repair and car operation



Kamri's Toyota
+ 1. Maintenance instruction
+ 1.2. Information before car driving
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Some councils upon car purchase
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
- 8. Transmission
   + 8.1.2. Care of MKPP
   + 8.2. Automatic transmission
   - 8.3. Coupling
      8.3.2. Coupling – the description and check
      8.3.3. Coupling details
      8.3.4. Vyzhimna bearing and fork
      8.3.5. Main cylinder of coupling
      8.3.6. Working cylinder of coupling and accumulator
      8.3.7. Coupling hydraulic actuator
      8.3.8. The blocking switch of coupling
      8.3.9. Probuksovochka
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


8.3.7. Coupling hydraulic actuator

Air removal

Pumping of system is required every time after carrying out dismantling and assembly of a hydraulic actuator of coupling.
PERFORMANCE ORDER
1. Fill a tank with fresh brake DOT-3 liquid (use of the fulfilled liquid is forbidden).
2. Lift a car front.
3. Dress on the cylinder union a hose and release in capacity filled with brake liquid on 5 see.
4. Ask the assistant to press a coupling pedal to the full. Unscrew the pumping union, having let out liquid, tighten the union and ask the assistant to release a pedal slowly. Repeat procedure until then while the hose will not cease to leave air vials.
5. When pumping constantly watch level, without allowing withdrawal of liquid from a tank.