Toyota Camry

1996-2001 of release

Repair and car operation



Kamri's Toyota
+ 1. Maintenance instruction
+ 1.2. Information before car driving
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Some councils upon car purchase
- 2. Maintenance
   2.2. Schedule of servicing of Toyota Camry/Avalon
   2.3. Primary and secondary checks
   2.4. Check of level of oil and liquids
   2.5. Check of a condition of tires and pressure in tires
   2.6. Check of level of liquid of system of hydrostrengthening of a steering
   2.7. Check of level of AKPP liquid
   2.8. Replacement of engine oil and oil filter
   2.9. Survey and replacement of brushes of screen wipers
   2.10. Check, servicing and battery charging
   2.11. Check, adjustment of a tension and replacement of a driving belt
   2.12. Check and replacement of hoses in an impellent compartment
   2.13. Check of system of cooling
   + 2.14. Shift of wheels
   2.15. Check of brake system
   2.16. Replacement of the air filter
   2.17. Power supply system check
   2.18. Check of level of liquid of differential (AKPP)
   2.19. Check of level of MKPP oil
   2.20. Steering and suspension bracket check
   2.21. Check of covers of semi-axes
   2.22. Check of final system
   2.23. Height and free wheeling of pedals of coupling and brake
   2.24. Replacement of the fuel filter
   2.25. Replacement of cooling liquid and washing of system of cooling
   2.26. Check of the system, supervising allocation паров fuels
   2.27. AKPP liquid replacement
   2.28. MKPP oil replacement
   2.29. Check of fastenings of a body
   2.30. Check and replacement of spark plugs
   2.31. Check and replacement of wires of spark plugs
   2.32. Check and adjustment of gaps of valves
   2.33. Replacement of laying of a cover of a jellied mouth of a fuel tank
   2.34. Check and replacement of the valve of ventilation of a case
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment
dahlquist dq-20 review



2.10. Check, servicing and battery charging

Check

Before work with the accumulator prepare necessary tools and materials.

Tools and materials necessary for maintenance of the accumulator

1. Protective guards / points

2. Soda

3. Technical vaseline

4. The tool for cleaning of plugs of the accumulator

5. Laying

6. Stripper

7. The tool for cleaning of contacts

8. Rubber gloves


Prevention

The electrolit of the accumulator contains sulfuric acid and allocates hydrogen which at a mix with air becomes explosive. Observe precautionary measures at work with the accumulator.
PERFORMANCE ORDER
1. Examine the accumulator on existence of leak or damages. Check reliability of fastening of the accumulator. Check a condition of plugs of the accumulator and reliability of contact of wires.
2. Check a battery charging. On some accumulators for check of a charging the special sensor is provided.

Maintenance

Corrosion on accumulator plugs usually looks as a white powder.

PERFORMANCE ORDER
1. If on plugs of the accumulator there are corrosion traces, disconnect wires from the accumulator and remove the accumulator for carrying out cleaning.
Always disconnect the first a wire of the minus plug of the accumulator.
2. Carefully clean contacts of wires and the accumulator plug by means of a metal brush or the special tool. Wash out plugs solution of warm water with soda.
3. Clear the accumulator shelf if it is necessary. Grease accumulator plugs with technical vaseline and connect wires. Reliably fix the accumulator on the storage shelf, having tightened nuts of fastening of the accumulator (are specified by shooters).

Battery charging

For a battery charging it is recommended to use the charger with a small current of a charging (1–2 Amperes). For a fast charging it is possible to use the charger with a big current of a charging, however, it should not exceed 1/10 capacities of the accumulator.

For a full battery charging the charger with a small current of a charging 12–16 hours usually suffice.