Toyota Camry

1996-2001 of release

Repair and car operation



Kamri's Toyota
+ 1. Maintenance instruction
+ 1.2. Information before car driving
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Some councils upon car purchase
- 2. Maintenance
   2.2. Schedule of servicing of Toyota Camry/Avalon
   2.3. Primary and secondary checks
   2.4. Check of level of oil and liquids
   2.5. Check of a condition of tires and pressure in tires
   2.6. Check of level of liquid of system of hydrostrengthening of a steering
   2.7. Check of level of AKPP liquid
   2.8. Replacement of engine oil and oil filter
   2.9. Survey and replacement of brushes of screen wipers
   2.10. Check, servicing and battery charging
   2.11. Check, adjustment of a tension and replacement of a driving belt
   2.12. Check and replacement of hoses in an impellent compartment
   2.13. Check of system of cooling
   + 2.14. Shift of wheels
   2.15. Check of brake system
   2.16. Replacement of the air filter
   2.17. Power supply system check
   2.18. Check of level of liquid of differential (AKPP)
   2.19. Check of level of MKPP oil
   2.20. Steering and suspension bracket check
   2.21. Check of covers of semi-axes
   2.22. Check of final system
   2.23. Height and free wheeling of pedals of coupling and brake
   2.24. Replacement of the fuel filter
   2.25. Replacement of cooling liquid and washing of system of cooling
   2.26. Check of the system, supervising allocation паров fuels
   2.27. AKPP liquid replacement
   2.28. MKPP oil replacement
   2.29. Check of fastenings of a body
   2.30. Check and replacement of spark plugs
   2.31. Check and replacement of wires of spark plugs
   2.32. Check and adjustment of gaps of valves
   2.33. Replacement of laying of a cover of a jellied mouth of a fuel tank
   2.34. Check and replacement of the valve of ventilation of a case
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


2.9. Survey and replacement of brushes of screen wipers

GENERAL INFORMATION

Periodically examine brushes and levers of screen wipers on existence of wear or damages. Check reliability of fastenings.

If rubber inserts of brushes are worn-out, cracked, or badly wipe glass them it is necessary to replace.

Type A
PERFORMANCE ORDER
1. Pull a rubber insert of a screen wiper sideways and remove it.
2. Establish a new rubber insert to those the end on which there are small ledges.


Type B

PERFORMANCE ORDER
1. Compress fixing clips of a rubber insert and remove an insert.

2. Establish a new insert of that the party on which there are no cuts.
3. Stretch an insert up to the end while short moustaches of metal fastening will not get to cuts (1).