Toyota Camry

1996-2001 of release

Repair and car operation



Kamri's Toyota
+ 1. Maintenance instruction
+ 1.2. Information before car driving
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Some councils upon car purchase
- 2. Maintenance
   2.2. Schedule of servicing of Toyota Camry/Avalon
   2.3. Primary and secondary checks
   2.4. Check of level of oil and liquids
   2.5. Check of a condition of tires and pressure in tires
   2.6. Check of level of liquid of system of hydrostrengthening of a steering
   2.7. Check of level of AKPP liquid
   2.8. Replacement of engine oil and oil filter
   2.9. Survey and replacement of brushes of screen wipers
   2.10. Check, servicing and battery charging
   2.11. Check, adjustment of a tension and replacement of a driving belt
   2.12. Check and replacement of hoses in an impellent compartment
   2.13. Check of system of cooling
   + 2.14. Shift of wheels
   2.15. Check of brake system
   2.16. Replacement of the air filter
   2.17. Power supply system check
   2.18. Check of level of liquid of differential (AKPP)
   2.19. Check of level of MKPP oil
   2.20. Steering and suspension bracket check
   2.21. Check of covers of semi-axes
   2.22. Check of final system
   2.23. Height and free wheeling of pedals of coupling and brake
   2.24. Replacement of the fuel filter
   2.25. Replacement of cooling liquid and washing of system of cooling
   2.26. Check of the system, supervising allocation паров fuels
   2.27. AKPP liquid replacement
   2.28. MKPP oil replacement
   2.29. Check of fastenings of a body
   2.30. Check and replacement of spark plugs
   2.31. Check and replacement of wires of spark plugs
   2.32. Check and adjustment of gaps of valves
   2.33. Replacement of laying of a cover of a jellied mouth of a fuel tank
   2.34. Check and replacement of the valve of ventilation of a case
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


2.5. Check of a condition of tires and pressure in tires

GENERAL INFORMATION

For check of depth of a protector it is possible to use the simple measuring device. If depth of a protector decreased below minimum admissible, it is necessary to replace tires.


Check a condition of drawing of a protector and degree of its wear. Non-uniform wear of tires testifies to bad balancing of wheels or bad adjustment of a suspension bracket.

Various forms of wear of drawing of a protector and possible reasons

1. Weak pressure in tires
2. Wrong convergence
wheels or too big disorder of wheels
3. Non-uniform wear
Possible reasons:
Weak pressure in tires, bad balancing or wheel deformation;

Steering drafts or steering soshka are worn-out;
Elements of a forward suspension bracket are worn-out or damaged.
4. Too high pressure in tires
5. Wrong adjustment of a suspension bracket

Examine tires on existence of cuts, the punctures, got stuck nails or other sharp subjects. If there is a leakage of air, first of all, check reliability of the valve of the chamber.

If it as it should be, check a tire surface on existence of punctures, having put soap water on a tire surface. Leakage of air will prove to be in the form of vials.

Regularly check pressure in tires by means of the exact sensor.