Toyota Camry

1996-2001 of release

Repair and car operation

Kamri's Toyota
+ 1. Maintenance instruction
+ 1.2. Information before car driving
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Some councils upon car purchase
- 2. Maintenance
   2.2. Schedule of servicing of Toyota Camry/Avalon
   2.3. Primary and secondary checks
   2.4. Check of level of oil and liquids
   2.5. Check of a condition of tires and pressure in tires
   2.6. Check of level of liquid of system of hydrostrengthening of a steering
   2.7. Check of level of AKPP liquid
   2.8. Replacement of engine oil and oil filter
   2.9. Survey and replacement of brushes of screen wipers
   2.10. Check, servicing and battery charging
   2.11. Check, adjustment of a tension and replacement of a driving belt
   2.12. Check and replacement of hoses in an impellent compartment
   2.13. Check of system of cooling
   + 2.14. Shift of wheels
   2.15. Check of brake system
   2.16. Replacement of the air filter
   2.17. Power supply system check
   2.18. Check of level of liquid of differential (AKPP)
   2.19. Check of level of MKPP oil
   2.20. Steering and suspension bracket check
   2.21. Check of covers of semi-axes
   2.22. Check of final system
   2.23. Height and free wheeling of pedals of coupling and brake
   2.24. Replacement of the fuel filter
   2.25. Replacement of cooling liquid and washing of system of cooling
   2.26. Check of the system, supervising allocation паров fuels
   2.27. AKPP liquid replacement
   2.28. MKPP oil replacement
   2.29. Check of fastenings of a body
   2.30. Check and replacement of spark plugs
   2.31. Check and replacement of wires of spark plugs
   2.32. Check and adjustment of gaps of valves
   2.33. Replacement of laying of a cover of a jellied mouth of a fuel tank
   2.34. Check and replacement of the valve of ventilation of a case
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment

2.25. Replacement of cooling liquid and washing of system of cooling


When the system of cooling gets littered, and cooling liquid gains rusty color, it it is necessary to replace and wash out cooling system.

Plums of cooling liquid
1. Remove a radiator cap.
2. Establish the pallet under a radiator and open a drain cap of a radiator (it is specified by an arrow) and merge cooling liquid from a radiator.
3. After liquid completely will flow down from a radiator, shift the pallet under a drain opening of the engine. Braid a cap and merge cooling liquid from the engine.
4. In four-cylinder engines the drain opening is located in a back part of the block of cylinders (it is specified by an arrow).
5. In the six-cylinder engine drain openings are located on both parties of the block of cylinders.
6. If cooling liquid has rusty color, the system of cooling is necessary for washing out.

Washing of system of cooling

1. Remove the thermostat.
2. Tighten caps of drain openings. Transfer the handle of adjustment of temperature in salon to the situation HOT for washing of a heater of an oven together with cooling system.
3. Disconnect the top hose of a radiator and wash out a radiator pure flowing water or a special cleaner. If the radiator is strongly littered, remove a radiator and address to experts for its washing and / or repair.

The gulf of cooling liquid

1. Establish the thermostat on a place and connect hoses of system of cooling.
2. Fill in cooling liquid in a radiator and in a broad tank to the bottom mark.
3. Get and warm up the engine.
4. Add liquid in a radiator. Put on a radiator cap.