Kamri's Toyota
+ 1. Maintenance instruction
+ 1.2. Information before car driving
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Some councils upon car purchase
- 2. Maintenance
2.2. Schedule of servicing of Toyota Camry/Avalon
2.3. Primary and secondary checks
2.4. Check of level of oil and liquids
2.5. Check of a condition of tires and pressure in tires
2.6. Check of level of liquid of system of hydrostrengthening of a steering
2.7. Check of level of AKPP liquid
2.8. Replacement of engine oil and oil filter
2.9. Survey and replacement of brushes of screen wipers
2.10. Check, servicing and battery charging
2.11. Check, adjustment of a tension and replacement of a driving belt
2.12. Check and replacement of hoses in an impellent compartment
2.13. Check of system of cooling
+ 2.14. Shift of wheels
2.15. Check of brake system
2.16. Replacement of the air filter
2.17. Power supply system check
2.18. Check of level of liquid of differential (AKPP)
2.19. Check of level of MKPP oil
2.20. Steering and suspension bracket check
2.21. Check of covers of semi-axes
2.22. Check of final system
2.23. Height and free wheeling of pedals of coupling and brake
2.24. Replacement of the fuel filter
2.25. Replacement of cooling liquid and washing of system of cooling
2.26. Check of the system, supervising allocation паров fuels
2.27. AKPP liquid replacement
2.28. MKPP oil replacement
2.29. Check of fastenings of a body
2.30. Check and replacement of spark plugs
2.31. Check and replacement of wires of spark plugs
2.32. Check and adjustment of gaps of valves
2.33. Replacement of laying of a cover of a jellied mouth of a fuel tank
2.34. Check and replacement of the valve of ventilation of a case
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment
|
The following signs can testify to malfunction in brake system:
– the car pulls aside by pressing a brake pedal;
– the scratch of brakes is audible;
– excessively free wheeling of a pedal of a brake;
– pulsation of a pedal of a brake;
– leakage of brake liquid, etc.
Disk brakes
| PERFORMANCE ORDER |
|
1. Check thickness of brake slips through an opening in a support (are specified by shooters). |
| 2. For exact check of thickness of brake slips and their condition remove supports of brakes and brake slips. Clear slips and check thickness and a condition of a frictional material. |
| 3. Measure thickness of a brake disk by means of a micrometer. Examine a disk surface on existence of deep scratches or flutes. |
| 4. Check all brake tubes and hoses on existence of damages or wear. Check reliability of fastenings and connections. |
|
Back drum-type brakes
| PERFORMANCE ORDER |
|
1. To check thickness of a frictional material of brake shoes, without removing a brake drum, remove a rubber cap (it is specified by an arrow) and examine blocks. |
| 2. For more careful check turn off two fixing screws in the center of a brake drum and remove a drum. |
| 3. Clear the brake mechanism by means of means for cleaning of brakes. |
|
4. Measure thickness of a frictional material of brake shoes. If material height over heads of rivets less than 1,5 mm, it is necessary to replace blocks. |
|
5. Check a condition of springs of the mechanism of a brake. Examine the wheel cylinder on existence of traces of leak. Check integrity of covers of the cylinder. Check brake tubes and connections. |
| 6. Examine an internal surface of a brake drum on existence of cracks, deep scratches and wear tracks. |
|
Vacuum amplifier of brake system
| PERFORMANCE ORDER |
| 1. Squeeze out a pedal of a brake and start the engine – the pedal should fall a little. |
| 2. At the working engine squeeze out a brake pedal several times – the course of a pedal of a brake should not change. |
| 3. Squeeze out a brake pedal, muffle the engine and hold a pedal in the pressed condition within 30 seconds – the pedal should not fall. |
| 4. Start the engine, let's to it work some minutes and muffle the engine. Squeeze out a brake pedal several times – the course of a pedal should decrease with each pressing. |
| 5. If the pedal of a brake behaved differently, the vacuum amplifier means is faulty, and it is necessary to replace it. |
|
Hand brake
| PERFORMANCE ORDER |
| 1. Count up number of the clicks necessary for reliable statement of the car on the hand brake. Adjust the mechanism of the hand brake if it is necessary. |
| 2. Check, that the hand brake could hold the car on an abrupt slope. |
| 3. Squeeze out a brake pedal, muffle the engine and hold a pedal in the pressed condition within 30 seconds – the pedal should not fall. |
| 4. Start the engine, let's to it work some minutes and muffle the engine. Squeeze out a brake pedal several times – the course of a pedal should decrease with each pressing. |
| 5. If the pedal of a brake behaved differently, the vacuum amplifier means is faulty, and it is necessary to replace it. |
|
|
|