Toyota Camry

1996-2001 of release

Repair and car operation



Kamri's Toyota
+ 1. Maintenance instruction
+ 1.2. Information before car driving
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Some councils upon car purchase
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
- 9. Running gear
   - 9.1.2. Technical characteristics
      9.1.3. Stabilizer of cross-section stability of a forward suspension bracket
      9.1.4. Rack of a forward suspension bracket
      9.1.5. Rack and suspension bracket spring
      9.1.6. Suspension bracket lever
      9.1.7. Spherical support
      9.1.8. Rotary fist and nave
      9.1.9. Nave and bearing of a forward wheel
      9.1.10. Stabilizer and plugs of the stabilizer of a back suspension bracket
      9.1.11. Rack of a back suspension bracket
      9.1.12. Longitudinal bar
      9.1.13. Levers of a back suspension bracket
      9.1.14. Nave and bearing of a back wheel
      9.1.15. Arm of a back suspension bracket
      9.1.16. Corners of installation of wheels
   + 9.2. Steering
   + 9.3. Semi-axes
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment



9.1.7. Spherical support

Replacement

PERFORMANCE ORDER
1. Lift the car and remove a wheel.
Prevention

If the spherical support is removed a stripper of zakhvatny type, before dismantle of a wheel release a nut of a nave of a wheel (semi-axis).


SUPPORT REMOVAL BY MEANS OF THE SLIDING BIFURCATE STRIPPER


Prevention

Procedure considered below provides the fastest removal of a spherical support, however, thus the cover of a finger of a support for certain will be damaged. If the cover has to be kept, be guided by the description in point support Removal by means of a zakhvatny stripper.


PERFORMANCE ORDER
1. Rashplintuyte also release a nut of a finger of a spherical support, a nut not completely not to turn on.
2. Vypressuyte a spherical support from a rotary fist by means of a sliding bifurcate stripper. Grease a cover with konsistentny greasing and work carefully not to tear a cover. Unscrew a nut of a finger of a support.

3. Unscrew a bolt and nuts of fastening of a spherical support to the lever of a suspension bracket and separate a support from the lever.
4. At assembly establish a spherical support on a rotary fist and screw a nut, a nut not to tighten.
5. Establish a support on the lever, turn and tighten nuts and a bolt with the set moment.
6. Tighten a nut of a finger of a support with the set moment and зашплинтуйте (шплинт replace new). If шплинт does not come into nut grooves, slightly tighten a nut before coincidence of the next groove with the shplinty.
7. Establish a wheel and lower the car.

SUPPORT REMOVAL BY MEANS OF ZAKHVATNOGO OF THE BIFURCATE STRIPPER

PERFORMANCE ORDER
1. Separate a spherical support from the suspension bracket lever (see subsection 9.1.6.).
2. Get a semi-axis from a rotary fist (see subsection 9.3.2.) also suspend, having fixed a wire.
3. Rashplintuyte also release a nut of a finger of a spherical support, a nut not completely not to turn on.

4. Dress a zakhvatny part of a stripper and выпрессуйте a spherical support from a rotary fist.
5. Unscrew a nut of a finger of a spherical support and remove a support.
6. At assembly establish a new spherical support on a rotary fist and tighten a nut with the set moment.
7. Insert a semi-axis into a rotary fist and wrap a nut. Tighten a nut, but not to the full.
8. Establish a support on the lever and tighten nuts and a bolt with the set moment.
9. Establish a wheel and lower the car. Nuts of a wheel tighten with the set moment.
10. Tighten a nave nut with the set moment (see subsection 8.3.1.), establish a lock washer and шплинт.