Toyota Camry

1996-2001 of release

Repair and car operation



Kamri's Toyota
+ 1. Maintenance instruction
+ 1.2. Information before car driving
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Some councils upon car purchase
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
- 10. Brake system
   10.2. Technical characteristics
   10.3. ABS system
   10.4. Blocks of disk brakes
   10.5. Brake support
   10.6. Brake disk
   10.7. Blocks of drum-type brakes
   10.8. Wheel cylinder of brakes
   10.9. Main cylinder of brakes
   10.10. Hoses and hydraulic actuator tubes
   10.11. Air removal from a hydraulic actuator of brakes
   10.12. Vacuum amplifier of brakes
   10.13. Blocks of the parking brake of back disk brakes
   10.14. Parking brake
   10.15. Cables of the parking brake
   10.16. Switch of a signal of braking
   10.17. ABS: natural choice
   10.18. Malfunctions of brake system
+ 11. Body
+ 12. Electric equipment


10.8. Wheel cylinder of brakes

GENERAL INFORMATION

Prevention

Cylinders change only in pair on an axis.


Removal

PERFORMANCE ORDER
1. Lift a back part of the car.
2. Remove blocks (see subsection 10.4. and subsection 10.7.).
3. Clear the wheel cylinder.
4. Unscrew the hydraulic actuator union. Shooters specified bolts of fastening of the wheel cylinder.
5. Unscrew bolts of fastening of the cylinder.
6. Remove the cylinder and muffle a tube.

Installation

PERFORMANCE ORDER
1. Establish the cylinder, wrap bolts by hand. Wrap the union and tighten fastening bolts.
2. Tighten the union and establish blocks and a drum.
3. Remove air from a hydraulic actuator.
4. Establish a wheel, lower the car and check work of brakes.