Toyota Camry

1996-2001 of release

Repair and car operation



Kamri's Toyota
+ 1. Maintenance instruction
+ 1.2. Information before car driving
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Some councils upon car purchase
+ 2. Maintenance
- 3. Engines
   - 3.1.2. Compression check
      3.1.3. Top dead point (VMT) of the N1 piston
      3.1.4. Cover of a head of cylinders
      3.1.5. Inlet collector
      3.1.6. Final collector
      3.1.7. Gas-distributing belt and asterisks
      3.1.8. Forward epiploon of a cranked shaft
      3.1.9. Camshaft epiploon
      3.1.10. Camshafts and lifts of valves
      3.1.11. Head of cylinders
      3.1.12. Oil pallet
      3.1.13. Oil pump
      3.1.14. Flywheel / leader disk
      3.1.15. Back epiploon of a cranked shaft
      3.1.16. Engine fastenings
   + 3.2. 6-cylinder dvukhryadny engines of V6 3,0 l
   + 3.3. Partition of engines
   + 3.4. Engine electric equipment
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment



3.1.15. Back epiploon of a cranked shaft

Replacement

PERFORMANCE ORDER
1. Remove a transmission.
2. You can replace an epiploon without removing its casing from the engine. Take an old epiploon by means of a screw-driver, grease a new epiploon and an epiploon nest with universal greasing and press an epiploon into place.

Prevention

To make replacement thus it is not recommended, because you can easily damage an epiploon.


3. To remove an epiploon casing, remove the oil pallet.

4. Beat out an old epiploon from a casing.

5. Press a new epiploon.
6. Grease an epiploon with universal greasing and put on a cranked shaft. Insert and tighten bolts of a casing of an epiploon till the demanded moment of an inhaling.