Toyota Camry

1996-2001 of release

Repair and car operation


Kamri's Toyota
+ 1. Maintenance instruction
+ 1.2. Information before car driving
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Some councils upon car purchase
+ 2. Maintenance
- 3. Engines
   - 3.1.2. Compression check
      3.1.3. Top dead point (VMT) of the N1 piston
      3.1.4. Cover of a head of cylinders
      3.1.5. Inlet collector
      3.1.6. Final collector
      3.1.7. Gas-distributing belt and asterisks
      3.1.8. Forward epiploon of a cranked shaft
      3.1.9. Camshaft epiploon
      3.1.10. Camshafts and lifts of valves
      3.1.11. Head of cylinders
      3.1.12. Oil pallet
      3.1.13. Oil pump
      3.1.14. Flywheel / leader disk
      3.1.15. Back epiploon of a cranked shaft
      3.1.16. Engine fastenings
   + 3.2. 6-cylinder dvukhryadny engines of V6 3,0 l
   + 3.3. Partition of engines
   + 3.4. Engine electric equipment
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


3.1.4. Cover of a head of cylinders

Removal

PERFORMANCE ORDER
1. Disconnect a wire of the minus plug of the accumulator.
2. Disconnect a ventilating hose from a head cover.
3. Disconnect wires from spark plugs.
4. Unscrew a bolt of a clamp of a plait of wires and shift wires aside.
5. Braid nuts of nests of spark plugs and uncover heads together with laying.

Installation

PERFORMANCE ORDER
1. Carefully clean surfaces of a cover and a head of cylinders.
2. Put hermetic on being joined surfaces (are designated by shading). Establish condensing rings of nests of spark plugs, labels on rings should be directed towards a gas-distributing belt.
3. Establish new laying of a cover, establish a cover and nuts of nests of spark plugs.
4. Tighten nuts till the demanded moment of an inhaling.
5. Establish the remained details, get the engine and check it on existence of leaks.