| 1. Remove the generator. |
| 2. Unscrew nuts of a back cover, a nut of a conclusion of the generator. |
|
3. Cнимите insulating plug of a conclusion of the generator. |
|
4. Remove a back cover of the generator. |
|
|
| 5. Unscrew screws and remove a shchetkoderzhatel and a tension regulator. |
|
6. Measure length of an acting part of brushes. If length of a brush less maximum permissible, a shchetkoderzhatel assembled with brushes replace. |
| 7. Be convinced that brushes freely move in a shchetkoderzhatel. |
| 8. Establish a tension regulator |
|
9. Establish a shchetkoderzhatel for what wring out brushes. |
| 10. Insert screws of a shchetkoderzhatel into a back cover. |
| 11. Establish a cover and tighten nuts, establish the plug and tighten a nut. |
| 12. Establish the generator. |