|
REASON
|
ELIMINATION METHOD
|
|
The starter does not rotate after ignition inclusion
|
| The storage battery is discharged | To charge the storage battery. |
| Break in a wire 50 to the lock of the switch of ignition, is damaged a wire of the switch of ignition | To eliminate break, to replace the damaged parts. |
| Break of a wire or weight conclusion. The storage battery is discharged | To check a wire and a conclusion of the storage battery. To measure tension of the storage battery, if necessary to charge it. |
| Insufficient receipt of a current because of the free or oxidized connections | To clear poles and plugs of the storage battery. Обемпечит necessary connection between the storage battery, a starter and weight. |
| Lack of tension on a conclusion 50 (the traction relay). Break in a wire, is damaged the ignition switch | To eliminate break, to replace the damaged parts. |
|
The starter works too slowly and does not rotate the engine
|
| The storage battery is discharged | To charge the storage battery. |
| The engine is not filled with all-weather or winter oil | To fill all-weather oil. |
|
Insufficient current because of the free or oxidized tips of wires
| To smooth out polar conclusions of storage batteries, a starter and tips of wires, to tighten connections. |
| Brushes do not contact to a collector, I am got jammed in the opravka, are worn-out are greasy or polluted | To check brushes, to clear or replace. To check a shchetkoderzhatel. |
| Inadequate gap between brushes and a collector | To replace brushes and to clear a shchetkoderzhatel. |
| On a collector deposit, risks, pollution | Переточить a collector or to replace an anchor. |
| Lack of tension on a conclusion 50 (at least 80В) | To check switching of the switch of ignition or the traction relay. |
| Bearings are beaten out | To check bearings, if necessary to replace. |
| The traction relay is damaged | To replace the traction relay. |
|
The starter is hooked and starts to work, but the engine does not rotate or rotates breakthroughs
|
| The gear mechanism (the mechanism of a gear wheel of a drive) is damaged | To replace the gear mechanism. |
| The drive gear wheel is polluted | To clear a gear wheel. |
| The gear wreath on a flywheel is damaged | To repair a gear wreath, if necessary to replace a flywheel |
|
The gear mechanism is not separated
|
| The gear mechanism or screw shlitsa are polluted or damaged | To clear or replace the gear mechanism. |
| The traction relay is damaged | To replace the traction relay. |
| The returnable spring burst or weakened | To replace a spring. |