Toyota Camry

1996-2001 of release

Repair and car operation



Kamri's Toyota
+ 1. Maintenance instruction
+ 1.2. Information before car driving
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Some councils upon car purchase
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
- 12. Electric equipment
   - 12.1.2. Search of malfunctions
      12.1.3. Safety locks
      12.1.4. Fusible crossing points
      12.1.5. Breakers
      12.1.6. Relay
      12.1.7. Breaker of indexes of turn / alarm system
      12.1.8. A combination of switches on a steering column
      12.1.9. Lock of ignition and lock drum
      12.1.10. Dashboard switches
      12.1.11. Indexes of level of fuel and oil temperature
      12.1.12. Guard of devices
      12.1.13. Screen wiper electric motor
      12.1.14. Receiver and loudspeakers
      12.1.15. Aerial
      12.1.16. Heater of back glass
      12.1.17. Lamps of headlights
      12.1.18. Headlights
      12.1.19. Case of a halogen headlight
      12.1.20. Sound signal
      12.1.21. Replacement of lamps
      12.1.22. Lateral mirrors with the electric drive
      12.1.23. System cruise control
      12.1.24. Window regulator electric drive
      12.1.25. Electric drive of door locks
      12.1.26. Safety cushions
   + 12.2. Electroschemes



12.1.10. Dashboard switches

GENERAL INFORMATION

SWITCH OF THE ALARM LIGHT SYSTEM

The switch of the alarm light system and the chart for its check


Position of the switch
Tested conclusions
Chain existence
OFF (is switched off)
7–10
There is a chain
ON (is included)
5–6–9
7–8
There is a chain
Lighting chain
2–3
There is a chain

The switch is mounted in the central part of the dashboard.

Check


Check chain existence between the specified conclusions. Replace the switch, if results at least with one of checks the negative.

Replacement
PERFORMANCE ORDER
1. Remove facing in the central part of the dashboard.
2. Submit the switch up and disconnect the socket, press a latch (it is specified by an arrow) and get the switch.

SWITCH OF THE ELECTRIC DRIVE OF THE MIRROR

Switch of the electric drive of a mirror (Camry, Solara)
Position of the switch
Tested conclusions
Chain existence
Off.
There is no chain
Up
1–9, 6-10
There is a chain
Down
1–10, 6-9
There is a chain
To the left
5–9, 6-10
There is a chain
To the right
5–10, 6-9
There is a chain




Position of the switch
Tested conclusions
Chain existence
Off.
There is no chain
Up
6–10, 7-9
There is a chain
Down
6–9, 7-10
There is a chain
To the left
6–10, 8-9
There is a chain
To the right
6–9, 8-10
There is a chain

Switch of the electric drive of a mirror (Avalon)
 
LEFT SIDE
Position of the switch
Tested conclusions
Chain existence
Off.
There is no chain
Up
2–6, 1-3 – 8
There is a chain
Down
3–6, 1-2 – 8
There is a chain
To the left
1–3–6, 2-8
There is a chain
To the right
1–2–6, 3-8
There is a chain

RIGHT SIDE
Position of the switch
Tested conclusions
Chain existence
Off.
There is no chain
Up
2–5, 1-3 – 7
There is a chain
Down
3–5, 1-2 – 7
There is a chain
To the left
1–3–5, 2-7
There is a chain
To the right
3–7, 1-2 – 5
There is a chain

The switch is mounted on the dashboard on the left side – under a ventilating nozzle on the Camry and Avalon models, or to the right of a nozzle on the Solara models.

Check

PERFORMANCE ORDER
1. Check chain existence between the specified conclusions. Replace the switch if results at least with one of checks the negative.

Replacement

PERFORMANCE ORDER
1. Carefully hook and get the switch.
2. Disconnect the socket and remove the switch.
3. Establish the switch upside-down.

SWITCH OF CONTROL OF DRAUGHT

The switch of control of draft works together with ABS system to improve draft in some road conditions. The switch is mounted on the panel to the left of a wheel.

Check

PERFORMANCE ORDER
1. Check chain existence between switch conclusions, having got it. By pressing contacts should become isolated, and at an otpuskaniye – to be opened. Otherwise the switch replace.

Replacement

PERFORMANCE ORDER
1. Carefully hook and get the switch.
2. Disconnect the socket and remove the switch.
3. Establish the switch upside-down.

THE LIGHTING SWITCH ON THE DASHBOARD

Check of the switch of lighting on the dashboard

At handle rotation tension between conclusions 2 and 3 should change.

On considered cars it is applied or the disk switch of lighting which is mounted in the top left part of the dashboard, or the switch with the taken-out handle, located under the left ventilating nozzle on the dashboard. Switches of both types are combined with a rheostat which is intended for lighting adjustment.

Check


PERFORMANCE ORDER
1. On the removed switch check a rheostat for what execute connections according to the scheme (see fig. Check of the switch of lighting on the dashboard). At handle rotation tension between conclusions 2 and 3 should change. Otherwise the switch replace.

Replacement

On cars with a lighting rheostat under the left nozzle hook and get the switch. For replacement of the disk switch it is necessary to remove a guard of devices.