Toyota Camry

1996-2001 of release

Repair and car operation


Kamri's Toyota
+ 1. Maintenance instruction
+ 1.2. Information before car driving
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Some councils upon car purchase
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
- 12. Electric equipment
   - 12.1.2. Search of malfunctions
      12.1.3. Safety locks
      12.1.4. Fusible crossing points
      12.1.5. Breakers
      12.1.6. Relay
      12.1.7. Breaker of indexes of turn / alarm system
      12.1.8. A combination of switches on a steering column
      12.1.9. Lock of ignition and lock drum
      12.1.10. Dashboard switches
      12.1.11. Indexes of level of fuel and oil temperature
      12.1.12. Guard of devices
      12.1.13. Screen wiper electric motor
      12.1.14. Receiver and loudspeakers
      12.1.15. Aerial
      12.1.16. Heater of back glass
      12.1.17. Lamps of headlights
      12.1.18. Headlights
      12.1.19. Case of a halogen headlight
      12.1.20. Sound signal
      12.1.21. Replacement of lamps
      12.1.22. Lateral mirrors with the electric drive
      12.1.23. System cruise control
      12.1.24. Window regulator electric drive
      12.1.25. Electric drive of door locks
      12.1.26. Safety cushions
   + 12.2. Electroschemes


12.1.20. Sound signal
GENERAL INFORMATION
Prevention

At signal refusal at first check safety locks.

Check

PERFORMANCE ORDER
1. Disconnect from a signal the socket.
2. Directly connect to a signal the battery. In the absence of a sound a signal replace.
3. If the sound is, check tension on a conclusion by pressing the signal button (the right arrow). In the presence of tension check connection with weight.
4. If tension is not present, check the relay. It is necessary to consider that relays of a sound signal generally have 4 or 3 conclusions (3-выводные relays have connection with weight via the case).
5. If the relay is serviceable, check tension on relay conclusions. If tension is not present, check wires from a safety lock to the relay.
6. If on relay conclusions tension is, press the button of a signal and check a chain of connection with weight between the relay and the button. If break is not present, replace the signal button.
7. If via the button the chain on weight becomes isolated, check existence in a chain from the relay on the button of break or short circuit.

Replacement

PERFORMANCE ORDER
1. For replacement of a sound signal disconnect the socket and unscrew a bolt.
2. Installation is carried out upside-down.