Toyota Camry

1996-2001 of release

LAMPS OF LATERAL INDEXES OF TURN / DIMENSIONAL LAMP

PERFORMANCE ORDER

	1. Unscrew the screw (or remove a latch) top fastening (shooter), submit the lamp case outside, having turned it on an axis, turn the holder of a lamp counter-clockwise and get a lamp from the case.
2. The lamp is established upside-down.

LAMPS OF BACK INDEXES OF TURN / BACK BRAKING LAMPS / SIGNAL

PERFORMANCE ORDER

	1. On the Avalon models unscrew 2 screws, submit the case sideways and remove an optical element.

2. On the Camry and Solara models for access to 3 lamps which are in a body, cast away a luggage carrier rug (in drawing on the right – an arrangement of lamps on the Avalon models).
3. Turn the holder counter-clockwise and remove.
	4. For access to the lamps located in a trunk lid, it is necessary to open covers on sticky fasteners.
5. Installation is carried out upside-down.

LAMPS OF ILLUMINATION OF REGISTRATION PLATE

PERFORMANCE ORDER

	1. Remove trunk lid facing (shooters showed fastening latches).
	2. Turn out cartridges of lamps (shooter) and replace lamps.
3. The lamp is established upside-down.

LAMPS OF THE TOP SIGNAL OF BRAKING

PERFORMANCE ORDER

	1. The plafond of a lamp fastens to a ware tray latches from below, from a luggage carrier. On a part of the Solara models on a trunk lid spoilers with braking signals are established.
	2. For replacement of lamps it is necessary to unscrew 2 screws of fastening of an optical element and to get the panel with lamps.
3. Turn the holder of a lamp counter-clockwise and get. Pull a lamp and get from the holder.
4. Installation is carried out upside-down.

LAMPS ON THE GUARD OF DEVICES

PERFORMANCE ORDER

1. Remove a guard of devices. Lamps get from the back party of a guard.
	2. To take turn a lamp counter-clockwise.
3. Installation is carried out upside-down.

LAMPS OF INTERNAL LIGHTING

PERFORMANCE ORDER

Remove a plafond of internal lighting and hook a lamp for edge (lamps are inserted in spring holders).