Toyota Camry

1996-2001 of release

Repair and car operation

Kamri's Toyota
+ 1. Maintenance instruction
+ 1.2. Information before car driving
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Some councils upon car purchase
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
- 12. Electric equipment
   - 12.1.2. Search of malfunctions
      12.1.3. Safety locks
      12.1.4. Fusible crossing points
      12.1.5. Breakers
      12.1.6. Relay
      12.1.7. Breaker of indexes of turn / alarm system
      12.1.8. A combination of switches on a steering column
      12.1.9. Lock of ignition and lock drum
      12.1.10. Dashboard switches
      12.1.11. Indexes of level of fuel and oil temperature
      12.1.12. Guard of devices
      12.1.13. Screen wiper electric motor
      12.1.14. Receiver and loudspeakers
      12.1.15. Aerial
      12.1.16. Heater of back glass
      12.1.17. Lamps of headlights
      12.1.18. Headlights
      12.1.19. Case of a halogen headlight
      12.1.20. Sound signal
      12.1.21. Replacement of lamps
      12.1.22. Lateral mirrors with the electric drive
      12.1.23. System cruise control
      12.1.24. Window regulator electric drive
      12.1.25. Electric drive of door locks
      12.1.26. Safety cushions
   + 12.2. Electroschemes

12.1.22. Lateral mirrors with the electric drive

GENERAL INFORMATION

The mirror drive in the majority of models is carried out from 2 electric motors of vertical and horizontal shift.

PERFORMANCE ORDER

1. Include ignition (the engine not to start) and lower lateral glasses. The selector which has been built in in the switch, include the necessary mirror and check work of a drive of the right and left mirrors, displacing them to the right and to the left, up and down.

2. Hear to operation of electric motors.

3. If operation of electric motors is listened, and the mirror does not move, the drive mechanism in a mirror is faulty. Remove a mirror and disassemble.

4. If operation of electric motors is not listened and mirrors do not move, check a safety lock.

5. If the safety lock is serviceable, get the switch and check short circuit of its contacts.

6. Attach the switch. Find a wire from the switch on weight. Without disconnecting the switch close a crossing point this wire on weight. If the mirror works normally with a crossing point, repair "regular" connection with weight.

7. If the mirror does not work, disassemble a mirror and check tension existence on wires. Include ignition and transfer the switch to all provisions, checking tension. On one of wires from the switch there should be a tension in each its situation (except for the situation Off).

8. If tension is absent, check a chain from a mirror to the switch.

9. If tension is, remove a mirror and check its work, having executed connection through crossing points. If the mirror does not work, replace it.