Toyota Camry

1996-2001 of release

Repair and car operation



Kamri's Toyota
+ 1. Maintenance instruction
+ 1.2. Information before car driving
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Some councils upon car purchase
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
- 12. Electric equipment
   - 12.1.2. Search of malfunctions
      12.1.3. Safety locks
      12.1.4. Fusible crossing points
      12.1.5. Breakers
      12.1.6. Relay
      12.1.7. Breaker of indexes of turn / alarm system
      12.1.8. A combination of switches on a steering column
      12.1.9. Lock of ignition and lock drum
      12.1.10. Dashboard switches
      12.1.11. Indexes of level of fuel and oil temperature
      12.1.12. Guard of devices
      12.1.13. Screen wiper electric motor
      12.1.14. Receiver and loudspeakers
      12.1.15. Aerial
      12.1.16. Heater of back glass
      12.1.17. Lamps of headlights
      12.1.18. Headlights
      12.1.19. Case of a halogen headlight
      12.1.20. Sound signal
      12.1.21. Replacement of lamps
      12.1.22. Lateral mirrors with the electric drive
      12.1.23. System cruise control
      12.1.24. Window regulator electric drive
      12.1.25. Electric drive of door locks
      12.1.26. Safety cushions
   + 12.2. Electroschemes


12.1.11. Indexes of level of fuel and oil temperature

GENERAL INFORMATION

The scheme of resistance between conclusions of indexes of level of fuel and oil temperatures

1. Index of level of fuel

2. Temperature index

Check

PERFORMANCE ORDER
1. Transfer the ignition key to the situation ON.
2. If shooters of indexes remain motionless, check a safety lock. If the safety lock is serviceable, find the sensor of the corresponding index and connect a sensor wire to weight. If the arrow moves to the necessary area of a scale of the index, replace the sensor. Otherwise connect to weight a conclusion on a reverse side of the index which is connected to the sensor (thus be guided by the scheme). If the arrow moved, conducting from the index on the sensor is faulty. Otherwise check tension on the second conclusion of the index. If tension is present, the index replace.

Prevention

Resistance between conclusions And and In on the serviceable index of level of fuel should be 126 Ohm, between And and With – 280 Ohm both between In and With – 154 Ohm. On the serviceable index of temperature these resistance should be 175 Ohm (And – In), 54 Ohm (And – C) and 229 Ohm (In – C).


3. For verification of indexes remove a guard of devices and check resistance of indexes.