Toyota Camry

1996-2001 of release

Repair and car operation



Kamri's Toyota
+ 1. Maintenance instruction
+ 1.2. Information before car driving
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Some councils upon car purchase
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
- 7. Exhaust system
   - 7.2. Systems of decrease in toxicity of exhaust gases
      7.2.2. Technical characteristics
      7.2.3. OBD II system
      7.2.4. OBD computer of II system (Powertrain Control Module)
      7.2.5. Sensor of turn of a butterfly valve
      7.2.6. The sensor of absolute pressure in a soaking-up collector
      7.2.7. Sensor of a mass consumption of air
      7.2.8. The sensor of temperature of soaked-up air (IAT sensor)
      7.2.9. The sensor of temperature of cooling liquid (ECT sensor)
      7.2.10. Sensor of rotation of the crankshaft
      7.2.11. Sensor of rotation of a cam-shaft
      7.2.12. Contact sensor of pressure of the hydraulic booster
      7.2.13. The sensor of the content of oxygen in the fulfilled gases
      7.2.14. Detonation sensor
      7.2.15. Sensor of speed of the car
      7.2.16. Perepuskna air valve of idling (IAC valve)
      7.2.17. System of a choice of the channel absorptions (ACIS system)
      7.2.18. System of ventilation of a case
      7.2.19. Retsirkulyatsiya system
      7.2.20. Catching system паров gasoline
      7.2.21. Converter
      7.2.22. Rub in one – or how to save the catalyst
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment



7.2.16. Perepuskna air valve of idling (IAC valve)

GENERAL INFORMATION

Perepuskna air valve

1. Perepuskna air valve
2. Laying
3, 9. Hose vacuum
4. Hose of the valve of fast idling
5. Tire of connection with weight
6. A wire on weight
7. Diagnostic socket.
8. Arm

Check

PERFORMANCE ORDER
Idling the heated-up engine перемкните conclusions of TE1 and Е1 on the diagnostic socket (drawing at the left). Turns should increase to 900–1300 rpm and later 5 seconds to return to the normal. Otherwise check resistance of the valve between average and extreme conclusions (drawing on the right), having disconnected the socket.

Replacement

PERFORMANCE ORDER
1. Remove a throttle branch pipe (see subsection 6.14.).
2. If resistance does not correspond to norm, the valve replace.
3. Unscrew screws and get the valve.