Toyota Camry

1996-2001 of release

Repair and car operation



Kamri's Toyota
+ 1. Maintenance instruction
+ 1.2. Information before car driving
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Some councils upon car purchase
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
- 11. Body
   11.2. Vinyl furnish
   11.3. Upholstery and rugs
   11.4. Insignificant damages of a body
   11.5. Considerable damages of a body
   11.6. Loops and locks
   11.7. Windscreen and motionless glasses
   11.8. Central lock
   11.9. Cowl
   11.10. Lock of a cowl and cable of a drive of the lock
   11.11. Decorative panels of bumpers
   11.12. Forward wing
   11.13. Trunk lid
   11.14. Latch and trunk lid lock
   11.15. Cable of a drive of unlocking of a door fuel tanks / trunk lids
   11.16. Facing panels of doors
   11.17. Door
   11.18. Latch, lock of a door and handle
   11.19. Door glass
   11.20. Window regulator
   11.21. Mirrors
   11.22. Central floor section
   11.23. Decorative panels of a forward part of facing of salon
   11.24. Casings of a steering column
   11.25. Dashboard
   11.26. Facing of a frame of a windscreen
   11.27. Seats
   11.28. Ware tray
+ 12. Electric equipment



11.12. Forward wing

Removal

PERFORMANCE ORDER
1. Lift the car and remove a wheel.
2. Remove a forward lamp of the index of turn / lay lighting (see subsection 1.3.5.2.).
3. The protective panel fastens bolts, screws and plastic latches (arrow).
4. Unscrew screws and remove latches of fastening of the protective panel of a wheel niche, remove the panel and a mud guard.
5. Open a forward door and unscrew a bolt of fastening of a wing to a body.
6. Unscrew a bolt of the bottom fastening of a wing to a body.
7. Unscrew a bolt of the panel of a bumper (And) in the bottom forward part of a wing, then a bolt of fastening of a wing to an arm (In).
8. After removal of the case of a lamp of the index of turn / lay lighting unscrew a bolt of fastening of a forward wing to an arm (shooter).
9. Unscrew three bolts of fastening along the top part of a wing.
10. Working with the assistant, raise and remove a wing.

Installation

Installation is carried out upside-down. Before an inhaling of bolts check coincidence of a surface of a wing to door and cowl surfaces.