Toyota Camry

1996-2001 of release

Repair and car operation



Kamri's Toyota
+ 1. Maintenance instruction
+ 1.2. Information before car driving
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Some councils upon car purchase
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
- 11. Body
   11.2. Vinyl furnish
   11.3. Upholstery and rugs
   11.4. Insignificant damages of a body
   11.5. Considerable damages of a body
   11.6. Loops and locks
   11.7. Windscreen and motionless glasses
   11.8. Central lock
   11.9. Cowl
   11.10. Lock of a cowl and cable of a drive of the lock
   11.11. Decorative panels of bumpers
   11.12. Forward wing
   11.13. Trunk lid
   11.14. Latch and trunk lid lock
   11.15. Cable of a drive of unlocking of a door fuel tanks / trunk lids
   11.16. Facing panels of doors
   11.17. Door
   11.18. Latch, lock of a door and handle
   11.19. Door glass
   11.20. Window regulator
   11.21. Mirrors
   11.22. Central floor section
   11.23. Decorative panels of a forward part of facing of salon
   11.24. Casings of a steering column
   11.25. Dashboard
   11.26. Facing of a frame of a windscreen
   11.27. Seats
   11.28. Ware tray
+ 12. Electric equipment


11.23. Decorative panels of a forward part of facing of salon

Removal and installation

PERFORMANCE ORDER
1. Disconnect the battery from weight

FACING OF THE GUARD OF DEVICES

PERFORMANCE ORDER
2. On cars with an adjustable steering column completely lower a column down.
3. On the Camry models unscrew two screws in the top part of facing of a guard of devices, submit facing on itself and deduce from gearing with latches (on the Avalon models 4 screws are provided).
4. A screw-driver edge carefully hook the lower part of facing and deduce from gearing with latches.
5. Installation is carried out upside-down.

KNEE BUFFER

PERFORMANCE ORDER
2. Unscrew screws of fastening of the lever of the lock of a cowl to the knee buffer.
3. Press on боковину a box for trifles (if it is provided) and remove it from the knee buffer.
4. Unscrew two bolts of fastening of the knee buffer, submit the buffer on itself and remove from latches. On the Avalon models remove previously a cover of the block of the safety locks mounted from the driver.
5. If access to space under the forward panel is necessary, unscrew bolts of fastening of the popliteal buffer which at the same time fix also an intensifying plate. Submit on itself bottom edge of an intensifying plate of the buffer and remove.
6. Installation is carried out upside-down.

CENTRAL FACING PANEL

PERFORMANCE ORDER
2. Hook and remove from latches the central facing panel. On the Avalon models submit on itself the panel and disconnect the socket from the switch of the alarm system (shooter).
3. Establish the panel upside-down.

THE BOTTOM FACING PANEL FROM THE PASSENGER AND THE PERCHATOCHNY BOX

PERFORMANCE ORDER
2. The bottom facing panel from the passenger fastens latches. Hook the panel and remove from latches.
3. On the Camry models open a perchatochny box and submit inside боковины a box, then unscrew fastening screws. On the Solara models unscrew two bottom screws, open a perchatochny box and unscrew the top screws. Remove a box together with the facing panel.
4. On the Avalon models unscrew three nuts under a door of a box and remove a door.