Toyota Camry

1996-2001 of release

Repair and car operation


Kamri's Toyota
+ 1. Maintenance instruction
+ 1.2. Information before car driving
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Some councils upon car purchase
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
- 11. Body
   11.2. Vinyl furnish
   11.3. Upholstery and rugs
   11.4. Insignificant damages of a body
   11.5. Considerable damages of a body
   11.6. Loops and locks
   11.7. Windscreen and motionless glasses
   11.8. Central lock
   11.9. Cowl
   11.10. Lock of a cowl and cable of a drive of the lock
   11.11. Decorative panels of bumpers
   11.12. Forward wing
   11.13. Trunk lid
   11.14. Latch and trunk lid lock
   11.15. Cable of a drive of unlocking of a door fuel tanks / trunk lids
   11.16. Facing panels of doors
   11.17. Door
   11.18. Latch, lock of a door and handle
   11.19. Door glass
   11.20. Window regulator
   11.21. Mirrors
   11.22. Central floor section
   11.23. Decorative panels of a forward part of facing of salon
   11.24. Casings of a steering column
   11.25. Dashboard
   11.26. Facing of a frame of a windscreen
   11.27. Seats
   11.28. Ware tray
+ 12. Electric equipment


11.19. Door glass

GLASS OF THE FORWARD DOOR

PERFORMANCE ORDER
1. Lift glass and remove facing of a door and the water filter (see subsection 11.16.).
2. Completely lower glass.
3. Raise glass so that only to provide access to bolts of fastening of glass through openings in a framework doors (Avalon model).
4. On the Camry models access to bolts of fastening of glass is provided through openings in the lower part of a door.
5. On the Solara models raise glass so that to unscrew three specified nuts.
6. Cover glass rags and unscrew two bolts of fastening of glass.
7. Get glass.
8. Installation is carried out upside-down.

GLASS OF THE BACK DOOR

PERFORMANCE ORDER
1. Remove facing of a door and the water filter (see subsection 11.16.).
2. Lower glass so that to provide access to bolts of fastening of glass. Unscrew bolts, holding glass. Get glass through a window doorway.
3. On the Avalon models lower glass so that to unscrew two specified bolts. At assembly bolts tighten only at the equal sizes A and B.
4. On the Camry models unscrew a bolt And back directing and two bolts In glass fastenings.
5. Installation is carried out upside-down.

BACK CORNERS (SOLARA MODELS)

Replacement of these glasses is carried out in car-care center or in a specialized workshop.