Toyota Camry

1996-2001 of release

Repair and car operation


Kamri's Toyota
+ 1. Maintenance instruction
+ 1.2. Information before car driving
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Some councils upon car purchase
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
- 11. Body
   11.2. Vinyl furnish
   11.3. Upholstery and rugs
   11.4. Insignificant damages of a body
   11.5. Considerable damages of a body
   11.6. Loops and locks
   11.7. Windscreen and motionless glasses
   11.8. Central lock
   11.9. Cowl
   11.10. Lock of a cowl and cable of a drive of the lock
   11.11. Decorative panels of bumpers
   11.12. Forward wing
   11.13. Trunk lid
   11.14. Latch and trunk lid lock
   11.15. Cable of a drive of unlocking of a door fuel tanks / trunk lids
   11.16. Facing panels of doors
   11.17. Door
   11.18. Latch, lock of a door and handle
   11.19. Door glass
   11.20. Window regulator
   11.21. Mirrors
   11.22. Central floor section
   11.23. Decorative panels of a forward part of facing of salon
   11.24. Casings of a steering column
   11.25. Dashboard
   11.26. Facing of a frame of a windscreen
   11.27. Seats
   11.28. Ware tray
+ 12. Electric equipment


11.27. Seats

FORWARD SEAT

Prevention

The part of cars is completed with seat belts with pirosistemy the preliminary tension, working at failure. On these cars it is forbidden to dismantle seat belts and to disconnect any sockets about belts. About malfunction of such system specifies fire of an emergency lamp of a safety cushion. In this case immediately it is necessary to hand over the car in car-care center.

On cars with lateral safety cushions before removal of seats deactivate the safety module (see subsection 12.1.26.).

PERFORMANCE ORDER
1. Remove slips and unscrew bolts of fastening of a seat.
2. Unscrew bolts of fastening of a seat (all it is specified 3 of 4 bolts).
3. Cast away a seat forward, disconnect sockets and remove a seat.
4. Installation is carried out upside-down.

BACK SEAT

PERFORMANCE ORDER
1. Raise a seat pillow, unscrew a bolt and remove a pillow, having deduced seat belts from grooves in a back part of a seat.
2. On the Camry and Solara models submit each back up, having deduced it from locks and cast away forward. Unscrew bolts. On the Avalon models remove a pillow and unscrew 4 bolts (arrow).
3. Installation is carried out upside-down.