Toyota Camry

1996-2001 of release

Repair and car operation

Kamri's Toyota
+ 1. Maintenance instruction
+ 1.2. Information before car driving
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Some councils upon car purchase
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
- 11. Body
   11.2. Vinyl furnish
   11.3. Upholstery and rugs
   11.4. Insignificant damages of a body
   11.5. Considerable damages of a body
   11.6. Loops and locks
   11.7. Windscreen and motionless glasses
   11.8. Central lock
   11.9. Cowl
   11.10. Lock of a cowl and cable of a drive of the lock
   11.11. Decorative panels of bumpers
   11.12. Forward wing
   11.13. Trunk lid
   11.14. Latch and trunk lid lock
   11.15. Cable of a drive of unlocking of a door fuel tanks / trunk lids
   11.16. Facing panels of doors
   11.17. Door
   11.18. Latch, lock of a door and handle
   11.19. Door glass
   11.20. Window regulator
   11.21. Mirrors
   11.22. Central floor section
   11.23. Decorative panels of a forward part of facing of salon
   11.24. Casings of a steering column
   11.25. Dashboard
   11.26. Facing of a frame of a windscreen
   11.27. Seats
   11.28. Ware tray
+ 12. Electric equipment

11.16. Facing panels of doors


1. On cars with a manual drive of a window regulator remove the drive handle, having removed a bracket with a fabric.
2. Remove the button of blocking of the lock.
3. On cars with the electric drive of a window regulator hook and remove a switch plate under which there is one of bolts of fastening of the panel (shooter).
4. Hook and remove an external cover of a mirror.
5. Hook and remove a cap, unscrew the screw.
6. In a forward part of a door remove plastic caps (And) and turn out screws (In).
7. Hook and remove a cap, unscrew the screw in a back part of a door.
8. Carefully hook and remove the panel from latches.
9. Submit the panel up, disconnect sockets and remove the panel.

10. For access to a window regulator or to the external handle of a door lift glass, remove the control unit a window regulator (on a part of cars), an arm of the facing panel and the loudspeaker (see subsection 12.1.14.).

11. Then carefully remove the water filter.


Installation is carried out upside-down. Previously be convinced available all latches of door facing. Before panel installation into place connect all sockets.