Toyota Camry

1996-2001 of release

Repair and car operation

Kamri's Toyota
+ 1. Maintenance instruction
+ 1.2. Information before car driving
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Some councils upon car purchase
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
- 11. Body
   11.2. Vinyl furnish
   11.3. Upholstery and rugs
   11.4. Insignificant damages of a body
   11.5. Considerable damages of a body
   11.6. Loops and locks
   11.7. Windscreen and motionless glasses
   11.8. Central lock
   11.9. Cowl
   11.10. Lock of a cowl and cable of a drive of the lock
   11.11. Decorative panels of bumpers
   11.12. Forward wing
   11.13. Trunk lid
   11.14. Latch and trunk lid lock
   11.15. Cable of a drive of unlocking of a door fuel tanks / trunk lids
   11.16. Facing panels of doors
   11.17. Door
   11.18. Latch, lock of a door and handle
   11.19. Door glass
   11.20. Window regulator
   11.21. Mirrors
   11.22. Central floor section
   11.23. Decorative panels of a forward part of facing of salon
   11.24. Casings of a steering column
   11.25. Dashboard
   11.26. Facing of a frame of a windscreen
   11.27. Seats
   11.28. Ware tray
+ 12. Electric equipment

11.18. Latch, lock of a door and handle

LATCH

PERFORMANCE ORDER

1. Lift glass and remove facing of a door and the water filter (see subsection 11.16.).
	2. Through an aperture in a framework of a door disconnect drafts from the external handle to a latch, from the lock to a latch and from the internal handle to a latch. The latch fastens to a door end face three screws.
3. All drafts of the mechanism of locking fasten plastic brackets. For their detachment hook a bracket in a gearing place with draft and remove draft from an opening. On cars with the electric drive of the lock disconnect from a latch the socket.
4. Unscrew screws and remove a latch through an aperture in a door framework.
5. Installation is carried out upside-down.

EXTERNAL HANDLE OF THE DOOR AND LOCK

PERFORMANCE ORDER

1. Lift glass, remove facing of a door and the water filter (see subsection 11.16.).
	2. Through an aperture in a framework of a door disconnect draft (And) from the external handle to a latch and unscrew bolts of fastening of the lock and the handle (In).
Prevention It is possible to unscrew also bolts and to get the handle outside that facilitates a draft detachment.
	3. Remove the handle and the lock. If necessary disconnect draft in the hinge (And), remove a lock ring or disconnect the socket B and unscrew a bolt From fastening of the switch of the lock (on models with the lock electric drive).
4. Installation is carried out upside-down.