Toyota Camry

1996-2001 of release

Repair and car operation


Kamri's Toyota
+ 1. Maintenance instruction
+ 1.2. Information before car driving
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Some councils upon car purchase
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
- 11. Body
   11.2. Vinyl furnish
   11.3. Upholstery and rugs
   11.4. Insignificant damages of a body
   11.5. Considerable damages of a body
   11.6. Loops and locks
   11.7. Windscreen and motionless glasses
   11.8. Central lock
   11.9. Cowl
   11.10. Lock of a cowl and cable of a drive of the lock
   11.11. Decorative panels of bumpers
   11.12. Forward wing
   11.13. Trunk lid
   11.14. Latch and trunk lid lock
   11.15. Cable of a drive of unlocking of a door fuel tanks / trunk lids
   11.16. Facing panels of doors
   11.17. Door
   11.18. Latch, lock of a door and handle
   11.19. Door glass
   11.20. Window regulator
   11.21. Mirrors
   11.22. Central floor section
   11.23. Decorative panels of a forward part of facing of salon
   11.24. Casings of a steering column
   11.25. Dashboard
   11.26. Facing of a frame of a windscreen
   11.27. Seats
   11.28. Ware tray
+ 12. Electric equipment


11.20. Window regulator

WINDOW REGULATOR OF THE FORWARD DOOR

PERFORMANCE ORDER
1. Remove facing of a door and the water filter (see subsection 11.16.).
2. Remove glass.
3. On cars with the electric drive of a window regulator disconnect the electric motor socket.
4. On the Avalon or Solara models unscrew bolts and nuts of fastening of the electric motor and a window regulator.
5. On the Camry models (a scissors type window regulator) designate the provision of a back bolt on the top directing. Unscrew bolts on bottom directing, then six screws of fastening of a window regulator and the electric motor (or a manual drive of a window regulator).
6. Remove a window regulator, having got it through an aperture in a door framework.
7. Installation is carried out upside-down. Before installation grease rubbing parts of a window regulator (shooters specified greasing points).

WINDOW REGULATOR OF THE BACK DOOR

PERFORMANCE ORDER
1. Remove facing of a door and the water filter (see subsection 11.16.).
2. Remove glass.
3. On cars with the electric drive of a window regulator disconnect the electric motor socket.
4. Unscrew bolts of fastening of the electric motor and a window regulator. On all considered cars fastening of a drive of glass of a back door same, as on a lobby.
5. Remove a window regulator, having got it through an aperture in a door framework.
6. Installation is carried out upside-down. Before installation grease rubbing parts of a window regulator.