Toyota Camry
1996-2001 of release
Repair and car operation
Kamri's Toyota
+
1. Maintenance instruction
+
1.2. Information before car driving
+
1.3. Independent maintenance
+
1.4. Technical characteristics
+
1.5. Some councils upon car purchase
+
2. Maintenance
-
3. Engines
+
3.1.2. Compression check
+
3.2. 6-cylinder dvukhryadny engines of V6 3,0 l
-
3.3. Partition of engines
3.3.1.2. 6-cylinder dvukhryadny engines
3.3.2. Major maintenance of the engine – general comments
3.3.3. Engine diagnostics by means of the vacuum gage
3.3.4. Major maintenance of the engine – alternatives
3.3.5. Auxiliary elements of the engine
3.3.6. Removal and engine installation
3.3.7. Engine partition
3.3.8. Head of cylinders and valves
3.3.9. Balancing device (the 4-cylinder engine)
3.3.10. Pistons and rods
3.3.11. Cranked shaft
3.3.12. Block of cylinders
3.3.13. Honingovaniye of cylinders
3.3.14. Radical bearings and bearings of rods
3.3.15. Measurement of size of a free wheeling of the balancing device
3.3.16. Piston rings
3.3.17. Radical bearings of a cranked shaft
3.3.18. Back epiploon of a cranked shaft
3.3.19. Shatunnye bearings
3.3.20. Installation of the balancing device of the engine
3.3.21. It is rather live, than it is dead …
3.3.22. Analysis of a dymnost of an exhaust
3.3.23. A gear belt for a drive of the mechanism of a gazoraspredeleniye
3.3.24. Emergence in deposit oil
3.3.25. Engine overheat
+
3.4. Engine electric equipment
+
4. Cooling system
+
5. Heating and ventilation
+
6. Fuel system
+
7. Exhaust system
+
8. Transmission
+
9. Running gear
+
10. Brake system
+
11. Body
+
12. Electric equipment
3.3.18. Back epiploon of a cranked shaft
PERFORMANCE ORDER
1.
Beat out an old epiploon from a casing.
2.
Press a new epiploon.
3.
Grease an epiploon with universal greasing and put on a cranked shaft. Insert and tighten bolts of a casing of an epiploon till the demanded moment of an inhaling.